WA-SWMB PAGING SPEAKER

Description
The WA-SWMB wallmount paging speaker provides a clear audible output for voice paging, background music and tone alerting. The sloping wall baffle is one of the most rugged you can buy and the rugged construction not only increases rigidity, but also eliminates baffle resonance and sound distortion. The special acoustic transparent grille cloth does not affect sound quality of output.
The WA-SWMB is supplied in either a walnut or a light oak finish to match most building interiors. The speaker baffle is fitted with an 8" dia. damped edge dual cone speaker rated at 15W which incorporates  a 6oz. Isotropic magnet capable of producing an SPL of 92dB.

The speaker incorporates a 25mm. dia. voice coil that converts electrical impulses into moving air particles and disperses the sound over an angle of 90 degrees @ -6dB @ 1kHz.  The speaker has a frequency response of 50Hz to 15KHz nominal and provides a measured SPL of 92dB  on axis, @15W @ 1kHz

A 70v 4 watt transformer is fitted as standard with tap settings of 4, 2, 1, 1/2 & 1/4 W selectable by color codes leads.

The speaker has an open back design and incorporates a keyslot on the back for wall mounting purposes. 

Features

  • High Efficiency and wide frequency response speaker for clear audibility. 
  • Various tap settings at 70v.
  • Rugged construction
  • Wooden sloped design in Walnut or Light Oak color.

WA-SWMB SPEAKER

Architects and Engineers Specifications

The speaker shall be a Minelec M-P4W or approved equal. The unit shall be wall mount sloping baffle speaker with an integral line matching transformer for connection to an amplifier with a 70v output.  A 4 watt 8 ohm /70v transformer shall be fitted with tap settings of 4, 2, 1, 1/2 & 1/4W.  Frequency response shall be 50Hz -15Khz. The speaker shall have a measured SPL of 92dB, @ 1 m. on axis @15W.  Sound dispersion shall be 90 degrees.
The unit shall incorporate a wall mounting bracket and shall be available in a Walnut or Light Oak wood grain finish of rugged construction to eliminate baffle resonance and sound distortion. 

Dimensions shall be Depth (top) 5.375". Depth (bottom) 3.875".  Height 10.625".   Width 9.625". Weight: 5.25lbs.
The operating temperature range shall be 0 degrees C to +60 degrees C.